Best Welders For Motorcycle Frames – Editor’s Pick!

If you own a motorcycle, there are times you must have wished to change the frame a little, haven’t you? If you have, you must have been looking around for the best welder for a motorcycle frame.

While tinkering about with your motorcycle might not be the best option if you don’t have any expertise, it wouldn’t hurt to try it. But how do you know what welder to use for your bike frame? With the help of our list of common welding processes.

Let’s dive right in.

Extinguisher for Welding

Comparison Table Of Motorcycle Frame Welders

Forney Easy Weld 140 MPForney Easy Weld 140 MP
  • Voltage range: 12-23 V
  • Weight: ‎25.8 pounds
  • Warranty: 1 year
Check Price!
LOTOS MIG 175 Mig WelderLOTOS MIG 175 Mig Welder
  • Warranty: 1 year
  • Voltage: 220 volts
  • Welding capacity: 18 Gauge – 1/4”
Check Price!
DEKOPRO 110/220V MMA WelderDEKOPRO 110/220V MMA Welder
  • Weight: ‎12.1 pounds
  • Material: ‎MMA
  • Duty cycle: 40/60
Check Price!
TOOLIOM 195A 110/220V Stick WelderTOOLIOM 195A 110/220V Stick Welder
  • Duty cycle: 60% (195A)
  • Output current: 195A
  • Protection class: IP21S
Check Price!

1. Forney Easy Weld 140 MP

Forney Easy Weld 261, 140 FC-i Welder


  • Weight: 19 lbs.
  • Output: 140 AMP.
  • Input: 120 V.
  • Duty cycle: 30% @ 90A.
  • Warranty: 12 months.

If you’ve grown a liking for arc welding, this multi-process arc welder should be a fantastic option. Whether you want to do contemporary welding or spice up the look on your motorcycle, this welder will help you do the job.

What makes it stand out from the rest of the options is that it integrates three welder types. You can use it as a stick welder, MMG welder, or as a DC TIG welder. However, it doesn’t come with accessories that would make TIG welding easier.

Like the previous option on this list, it has the easy start function to weld fast. It is also easy for you to change the process fast, thanks to the three-position switch. You can therefore work at incredible welding speeds while offering you consistent heat control.

This welder makes it easy to control your weld thanks to the welding wire speed controls and infinite voltage. You can therefore get quality welds while doing it at a fast rate. Also, this welder is quite rugged.

You can use it to make tig – quality looking welds in the toughest of environments. That’s because it has an all-metal case that boosts its durability. Also, the case can handle close to two- and ten-pound cold rolls of wire. Impressive, isn’t it?

That’s not all.

Besides its ability to run stick electrodes, you can also run mild steel in a gas setup. That’s a further testament to the versatility of this welder. You can run any advanced welding process as the advancement of arc welding has afforded you.

Among the accessories, it comes with contact tips for proper penetration, an integrated handle, adapters, and many other accessories. If you have bad safety habits, you can rest easy knowing you will be safe with the welder.


  • Consistent heat control even when switching positions.
  • Metal case makes it ideal for demanding work environments.
  • Can work on a variety of materials.
  • It is a three in one welder that can work on thicker gauge steel.


  • The basic setup can be challenging to accomplish.

2. Lotos MIG 175Amp Welder

Lotos MIG175 welder review


  • Warranty: 1 year.
  • Volt: 220 V & Weight: 85.0 pounds
  • Welding capacity: 18 Gauge – 1/4”.
  • Flow rate: 12.00 L / Min.
  • Thermal overload protection

While this welder won’t work on thicker gauge steel, it is an excellent option for stainless and mild steel. If you know the basics of welding, you will be impressed by the stability this welder offers you during the arc welding process.

The Lotos is also a multi-usage welder. You can choose from a weld pool of several metals, including aluminum and any other variety of materials. You need to ensure the material thickness isn’t that much for the welder.

Another thing you will love with this welder is that it is reliable and durable. That’s because it features the latest transformer technology. You also don’t have to purchase a separate spool gun since it comes with one.

The MIG spool gun boosts the welder’s arc welding capability, enabling you to work on an aluminum or thinner aluminum plate. The wire range is also considerable enough, thus widening the pool of metals you can work on with the welder.

Therefore, if you are looking for quality welds for your motorcycle frames, this one would fit the bill nicely.


  • Works on different material thickness varieties.
  • Control of heat is easier thanks to the spool gun.
  • Minimal chances of incomplete penetration.
  • Ideal for thinner materials.


  • Getting replacement parts is challenging.

3. Dekopro MMA Welder

DEKOPRO 110/220V MMA Welder


  • Weight: ‎12.1 pounds
  • Material: ‎MMA.
  • Duty cycle: 40/60.
  • Input power: 5.8 KW.
  • Best for car bodywork.

This welder features advanced IGBT inverter technology to work on different materials from mild steel, stainless steel, weld steel, and cast iron. The IGBT power control it comes with makes it easier to control when welding.

One thing we loved about this welder was the portable design. It has handles, a carrying case together with a compact design. You can thus move with it wherever you go without having to worry about it being too bulky.

This welder is also quite energy-efficient. It’s possible to get remarkable energy-conserving results with iron or copper welds. The reduced damage on the copper and iron welds makes it a fantastic option for metals with such parent materials.

You will also love the closed-loop feedback control that makes it easy for the output voltage to be stable. That also allows for stronger adaptability to electricity networks for the welding process. 

With the Dekopora welding machine, you also don’t need to worry about your safety. That’s because it has an asynchronous control system that makes it safe for you to perform any form of welding.


  • It is a multipurpose welder.
  • The high-efficiency fan makes it safer to use.
  • A sturdy frame boosts durability.
  • The portable design makes it convenient.


  • The ground clamp isn’t that durable.

4. Tooliom Arc Welding Machine

TOOLIOM 195A 110/220V ARC Welding Machine


  • Input: 120A/195A
  • Duty cycle: 60%
  • Max. Output:195A

Closing off our list is yet another versatile material that boasts dual voltage input. You can therefore connect it to either 120 or 240v receptacles. The welder can work on different metals from stainless steel or components with metal as the base material.

This welder is arguably one of the smartest on our list. That’s because it has an LED display that allows you to know the welding current you are working with. As if that’s not enough, the stick welder is also easy to carry.

It has straps and is lightweight to ensure you can carry it almost anywhere. With the inbuilt dig-arc force, anti-stick, and hot start function, you will find this welder incredibly easy to use. That makes it relatively beginner-friendly.

Among its many uses is lift TIG, although it doesn’t come with a welding torch. All these materials are easy to weld thanks to the high-quality arcs the weld can achieve. That also means you can try out a distinct form of welding whenever you feel like it.

If you need an actual welder for your motorcycle frames, you don’t need to look any further than here.


  • Makes smooth arcs on cellulose and electrodes.
  • Hot start ability makes it easy to generate high-quality arcs.
  • It has an inbuilt anti-stick.
  • Robust thrust and less splatter.


  • It doesn’t come with a welding torch.

5. The Campbell Hausfeld Arc Stick Welder

The Campbell Hausfeld Arc Stick Welder


  • Duty cycle: 20% @ 50A.
  • Current: 115 V.
  • Warranty: 5 years.
  • Weight:24 pounds.

Kicking off our list is this durable metal welder that will allow you to tailor-make your motorcycle frame to your specifications. It has a comfortable handle that reduces hand fatigue when you are welding.

You can weld up to 1.8 inches of 18ga material so long as you use welding rods between 1/16 and 5/64 inches, respectively. Another thing that makes this arc stick welder an excellent option is that you can use it on dal heat setting. That makes it ideal for both hobby welding and small welding repairs.

Another thing that will delight you is the easy starting smooth arc the welder will give you. That’s beside the thermal overload protection that protects your hands whenever the welding machine overheats.

With this welder, you can also weld 18 gauge to 1/8 inches of stainless steel with ease. That’s thanks to the welder being powered by a 115-volt current. That enables it to generate close to 70 amps of power for either stick welding or tig welding.


  • It is relatively affordable for the features it packs.
  • Thermal overload protection makes it safe to use.
  • It has a comfortable fit handle that prevents hand fatigue. 
  • It is portable and relatively easy to use.


  • It isn’t that powerful a welder.

How To Choose the Best Welder for Motorcycle Frames

There are several things you will need to consider when getting a welder for motorcycle frames.

  1. The ease of use: The welder should be easy to use such that even a beginner wouldn’t have trouble using it.
  2. Accessories: Most welders will come with different accessories that make them easier to use. Such might include a welding torch or any other extra thing that makes them easier to use. You should always consider such accessories besides the mechanical properties.
  3. The Price: While most welders are quite pricy, you have to invest highly to get the best. It makes little sense to go for a cheap machine only to find that it doesn’t come with the accessories you need.

Frequently Asked Questions (FAQs)

Q. Can I use a MIG welder on a motorcycle frame?

Yes. It is possible to use a MIG welder on a motorcycle frame. The frame, however, needs to be made of steel or steel filler material. However, the most suitable welder for motorcycle frames is gas tungsten arc welding or gas metal arc welding.

Q. Can you stick weld a motorcycle frame?

Oh yes, you can. However, you will need to be a skilled welder to avoid blowing through the frame since it is usually relatively thin.

Q. What type of steel is ideal for motorcycle frames?

The most common type of steel in motorcycle frames is high tensile or carbon steel. That’s because it’s durable and isn’t that light.

Final Thoughts

If you need the best welder for motorcycle frames, we trust you now have a better idea about what to look for. Try out the ones we have here to tailor-make your motorcycle. We assure you it won’t hurt a bit.

Related Post

  1. Try these 3 Best Work Light for Welding
  2. Best 110v Stick Welder That’ll Upgrade Your Welding Skill A Bit
  3. What To Look For Best AC/DC TIG Welder Under $1000?
  4. Best Fire Extinguisher for Welding – Our Recommendations
  5. 5 Best Portable Spot Welders (And Affordable) Worth Paying
  6. Military Support Welder: How to Get Started!
  7. Best Plastic Welders Review & Buying Guide
  8. Wire Feed Welder Reviews
  9. Best 3 in 1 Welder: The Ultimate Welder For All Purposes
  10. What Is The Best Welding Machine For Beginners?
  11. Best Flux Core Welder Under $300?