We know how important it is to have a good-quality welder in your workshop. However, matching all the requirements in a single place is always a tough job.
So, what if we get our hands on a unique welder generator combo that fulfills all of our needs? Well, it sure sounds like a perfect plan. Now, here is the deal.
Today, we will be presenting you with our Hobart champion elite review. Starting from the overall descriptions to all the drawbacks, we will cover up all the topics that you need to know. Therefore, stay tuned as we will find more about this Hobart Champion Elite Welder/generator.
Why should you choose this product?
Alright. We got that the Hobart Champion Elite is a great edition. But what makes it so special? Well, look at some of the key features and find it yourself by learning more about these Hobart champion elite specs.
Key features
- The welder is capable of delivering 11,000W of AC power for running tools or as a backup.
- It has a Kohler twin-cylinder of 23HP and an OHV engine of 4-cycles.
- With the mobile source welder/generator, you will get a continuous power generation of 9,500 Watts.
- Because of the unit length of almost 4-feet, the welder is easily portable.
- The duty cycle is 100%, and the welding amperage range is 40-225 DC.
- The welder features a gross torque of 37.9 lbs. /ft., and fuel capacity of 12 gallons.
Similar products to Hobart champion elite
Lincoln Ranger 330MPX Engine Welder Generator K3459-1
- 60% quieter
- 100% duty cycle
Things we like most
Now that you saw the features, what attracted you the most? Well, if you asked me, I’d mention several things here.
Firstly, the simultaneous working capability draws immediate attention.
After that, it gets better with the compatibility with the light industrial jobs, MRO, and hobby applications.
And finally, the super-efficient welding support makes it a superb choice.
What could be better?
All we have done up until now is witnessing the superb facilities of this welder/generator. Now, judging by all the aspects, it looks like a perfect deal. So, does it mean that it is flawless? Of course not.
Now, the first thing that might draw your attention is the idling issue. Although it should work fine with idle-mode, you might face some difficulties. As a result, it remains high even when you are not running it.
Again, some faced problems with welding performance as well. You see, the welder is not always consistent with its performance when you are working on the low or mid amperage range.
Hobart Champion Elite vs Lincoln Eagle
The majority of us might have heard about the Lincoln Eagle. And why not? It is a super popular welder in the market. Now, you might be wondering what the differences between both of them.
First of all, the Hobart Champion Elite offers a better duty cycle than the Lincoln Edge. Again, Lincoln has a bit less peak generator power than the Hobart one.
Lastly, the Hobart Champion one is a bit lighter than the Lincoln one. As a result, you get an advantage while carrying it around. Therefore, both of them have a lot in common. Still, some aspects make them different from each other.
Hobart Champion Elite vs Miller Bobcat 225
Now, the Hobart Champion Elite has a lot of similarities and dissimilarities with the Miller Bobcat 225. To make things easier for you, here we included a comparison table between the two. So, go through the table and compare both of them.
| Parameters | Hobart Champion Elite | Miller Bobcat 225 |
|---|---|---|
| Welding Amperage Range | 40 to 225 | 50 to 225 |
| Power Source Type | Gas | Gas |
| Wattage | 11,000 | 11,000 |
| Start Type | Electrical | Electrical |
| Weight (lbs.) | 493 | 496.99 |
| Engine Power | 23 HP | 23 HP |
| Dimension (inches) | 41.5 x 23.5 x 32.9 | 40.5 x 20 x 32.75 |
Frequently Asked Questions (FAQs)
You could check out several Hobart champion elite welder reviews. However, there is no such guarantee that you wouldn’t have any queries. Therefore, we gathered up some frequently asked questions for you. (Read Lincoln 140 Vs Hobart 140 post).
Question: Can I use it to weld galvanized metals?
Answer: Of course. You can use it to weld stainless steel and galvanized metals.
Question: Do I get a circuit breaker with the welder?
Answer: Yes, you will get circuit breakers with it.
Question: What is the noise level of this welder?
Answer: The welder/generator has a noise level of 75.5 decibels.
Question: Which is the appropriate sector to use this welder?
Answer: Well, you can use it for hobby applications and light industrial works.
Conclusions
We reached the end of our discussion about the Hobart champion elite reviews. So, what’s the bottom line? Of course, there are some flaws and drawbacks. Not to mention, you might also have different opinions or requirements.
However, despite those negative aspects, you cannot deny the fact that there are many more advantages to it. Therefore, give it a fair chance and enjoy this remarkably versatile welder/generator.
Related post
- Lincoln AC 225 Welder Review
- Tweco 211i Fabricator Multiprocess Welder Reviews
- Vulcan Omnipro 220 Reviews
- Hobart Handler 190 Reviews
- Best Tig Welder For The Money
- Best Welding Helmets Review: Protect Your EYES
- Hobart Handler 140 Review
- Amico Welder Review | Why We Love Amico (You Should Too!)
- Lincoln Viking 3350 Review
- Optrel Panoramaxx Review – Is It Worth For $300 Plus?
- Tacklife Welding Helmet Review – In Depth Research
- DEKO Welding Helmet Review
- Yeswelder Welding Helmet
- Miller Digital Infinity Vs Lincoln Viking 3350
- Zeny Plasma Cutter Review
- Klutch Plasma Cutter Reviews – A Practical Guide (Updated)
- Miller 375 Plasma Cutter Reviews – Practical Guide!
- Firepower Welder Review
- Primeweld Plasma Cutter Reviews
- Review Of Eastwood 175 Welder
- Campbell Hausfeld Welder Review
- Metal Man Welder Reviews
- Miller Diversion 180 Review
- Miller Snycrowave 210 Review – Best DIY Welder
- Century FC 90 Review
- Clarke 130en MIG Welder Review
- Miller Multimatic 215 Reviews
- Lincoln Handy MIG Welder Review
- 3m Welding Helmet Review
Leave a Reply