Does Gorilla Glue Conduct Electricity? (For Beginners)

We often need to use adhesives when working with electrical wires. It is risky and challenging as there are high chances of accidents.

Even for small tasks like fixing lamp wires with glue, chances are to end up with a shock. But that won’t happen if the adhesive you will use is non-conductive.

If you plan to use gorilla glue, you need to know whether it’s a conductive adhesive.

Don’t worry! This article will tell you about does gorilla glue conduct electricity or not. So, let’s dive right into the discussion without wasting any second.

How to tell if gorilla glue is really conductive?

Most glue are terrible conductors of electricity. Other than a few exceptions, most adhesives and glues are good insulators.

Gorilla glue falls under the same category. It isn’t conductive glue because of its polyurethane properties. This type of glue has the characteristics of plastic; hence they turn out to be good insulators.

Moreover, as the gorilla glue is entirely made of plastic polymer, electricity can’t pass through it.

Can you use gorilla glue on wires?

Using polyurethane gorilla glue won’t be suitable for joining or fixing wires. It would result in expansion when the glue cures, and it might even foam.

Eventually, using gorilla glue directly would push the wires apart. Also, you might even need to clamp it, and blobs of cured polyurethane glue might also be present.

Here the better ploy is to go for the cyanoacrylate adhesive variant of gorilla glue, also known as gorilla super glue.

Cyanoacrylate glues might not fill the gaps very well but are effective in close contact. It will ensure a proper bond between thick and thin wires that require joining.

Besides, we suggest you flatten the point of contact, resulting in the bond having greater strength.

Is gorilla glue safe for electronics?

Some people might be reluctant to use glue for electronics. The reason might be either the possible electrical conductivity of the adhesive or the chances of the bond damaging the electrical components.

But the reality is that it is entirely safe for anyone to use particular glues on electronic components.

Mainly hot glue is primarily applied as adhesives on electronic appliances. Its potting method can eradicate the chances of electric vibration or shock.

But when it comes to gorilla glue, the gorilla clear glue variant works best for any electronic component. It is a top-notch adhesive that does the job of gluing electronics perfectly.

Instead of getting hard quickly, it stays liquid for an extended period and repels against dripping. The best part about this glue is that it ensures a strong bond formation within a few minutes.

It is the best glue for electronics as it has waterproof and non-foaming capability.

Therefore, gorilla clear glue has to be the best glue for electrical appliances as a secure option.

What kind of glue is conductive?

Glues tend to be insulative in nature. The main reason is that most of them are made of plastic polymer.

But there are also electrically conductive adhesives. These are some adhesives that are composed of four-fifth metal concentration. As a result, electricity passes through when you apply metallic glue to a metallic component.

Several metal-based adhesives possess such elements. Here, the metals are prominently silver, copper, and iron.

The glues that you know as wire glue most of them have copper in their composition. They are moderately conductive and priced.

The silver ones are highly-priced and conductive, whereas copper glues are relatively cheap.

Can you use glue instead of solder?

Solder is a workable alloy that helps to create a permanent bond between metal pieces. If you plan to use glue instead of solder, it won’t be a good idea.

There is a lot of confusion about whether different types of gluing can be applied instead of soldering.

Epoxy glue or even the superglue, every option would result in keeping better hold of the wire wraps. But finally, it won’t provide the desired outcome.

Some epoxy adhesives might have some conductive element but can only be used in some specific scenarios. And in the case of duct tape and plastic tape, they are hardcore insulators, so electricity passes.

Therefore, there is no point in using them. Overall, wire-wrapping is a good alternative but can’t provide all the outcomes of soldering.

Can you use gorilla glue on a circuit board?

In a circuit board, you will be able to use different glues, starting from polyurethane to cyanoacrylate glue.

Using gorilla glue won’t be an issue as it doesn’t conduct electricity. Applying it as an adhesive over the metal PCB won’t be risky.

Bottom line

Hopefully, you have gotten you answer about does gorilla glue conduct electricity. If you feel that applying gorilla glue on electric wire or components can be hazardous, you are wrong.

Being polyurethane glue, it’s highly insulative, so there is no chance of electrical conduction. Even it has variants like gorilla super glue gel a cyanoacrylate.

Moreover, there shouldn’t be any confusion when using different materials for electric components.

Brandon M. Fox

I have completed Diploma at Welding. I have spent 10+ years in Welding. Now love to write about welding and welding products and share my own experiences. Find me: Twitter | Facebook